National service hotline: 0552-3951227     

 
 
 
APPLICATION
 
 
Mining industry
   
   

 Polyacrylamide can be applied in the mining,processing and tailing disposal process of mines such as coal, gold, silver, copper, iron, lead and zinc, aluminium, uranium, nickel, phosphorus, potassium, manganese and other minerals.Its main purpose is to improve the efficiency of the solid-liquid separation and recovery rate;


Ⅰ.ALUMINA ORE 
In the production process of alumina, mineral is firstly broken into pieces to make sure their radius is smaller than 1 mm. Feed strong sodium hydroxide solution to the system with high temperature and high pressure . Only aluminum and soluble silicon can be dissolved in this highly corrosive liquid, while impurities will not to be dissolved.  
Add anionic polyacrylamide flocculant to the primary thickening tank to obtain clarified overflow is an very important process,in which aluminum is recovered.Thus,the overflow in the primary thickening tank rich in aluminum are to be processed(filtering,cooling,precipitating) to obtain aluminium.
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
White granular
600-2000
40-70
< 1.5h
>88

Ⅱ.COAL INDUSTRY
Flotation process is usually adopted to gain cleaned coal with high combustion value.Since the difference in proportion between coal particle and impurity in water,coal mine will float on the surface of the water while the impurity will percipitate at the bottom of the container.Cleaned coal is obtained after further process.In the above process,impurity can be removed and water can be recycled.Polyacrylamide can function as a flocculant to improve the seperation efficience of water and impurity.
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
White granular
2000-2000
0-50
< 1.5h
>88

Ⅲ. GOLD AND SILVER INDUSTRY
After the mine is grinded, anionic polyacrylamide flocculant can be fed to the thickener to subside the Solid content(%),and then the bottom substance can be filtered through several filters.Add polyacrylamide to the thickener before the filtration.
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
White granular
1100-2000
0-50
< 1.5h
>88

Ⅳ. LEAD AND ZINC INDUSTRY
Minerals can be oxidized to zinc oxide by calcination.Next,feed sulfuric acid to dissovle the oxide and filter.All the cleaned mines can be dissolved in acid with PH around 5 or 2.5.
In lead and zinc filtering process, the use of anionic polyacrylamide flocculant can effectively promote the rapid subsidence of mineral and the clarification of the filtrate and improve the production efficiency of the process, reduce the loss of minerals. 
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
White granular
600-2000
0-50
< 1.5h
>88

Ⅴ. COPPER INDUSTRY
The pulp or tailings from the flotation cell need enter into thickening tank for further settlement. Flocculant can be fed for the promoting of subsidence and obtaining of overflow. The gained overflow can serve as circulating water.The remaining concentrated tailings will be pumped into the centrifugal for centrifuge dewatering,in which anionic polyarylamide as centrifugal additives is utilized. Anionic polyacrylamide flocculant is used to improve the efficiency of sedimentation and filtration. The concentrate of copper gained from cleaned mine or filter cake is 25% to 35%. It will be recovered through high temperature metallurgy.
Products can be applied to cleaned mine and the subsidence of flotation tailings are:
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
White granular
600-2000
0-50
< 1.5h
>88

Ⅵ. NICKEL INDUSTRY
In the "wet" process,feeding PAM can get a quick water-mud separation effect when separate nickel from nickel mine. 
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
White granular
600-2000
0-50
< 1.5h
>88

Ⅶ. PHOSPHATE INDUSTRY
Phosphate tailing is usually percipitate in thickening tank. Since the particles of phosphate tailing are very small, it is particularly important to choose a suitable flocculant.
Product appearance
Molecular weight(106)
Hydrolysis(%)
 Dissolution time
Solid content(%)
White granular
600-2000
0-50
< 1.5h
>88
Usage and dosage:
The concentration of the solution of this product works best in 0.1-0.5%. when being dissolved, sprinkle 1kg anionic polyacrylamide product evenly into the water with stirring the water.Filter the solution after a hour with a 40 mesh sieve.Dilute with water when using.
 

 
               
 
 
 
 
 
 
友情链接: