National service hotline: 0552-3951227     

 
 
 
APPLICATION
 
 
Water treatment
   
   

 Polyacrylamide, as a flocculant, can be widely used in industrial waste water,mixed industrial-domestic wastewater, sewage treatment. Also,its application areas include the following fields for its solid-liquid separation property:Petroleum, metallurgy, electric power, chemical industry, papermaking, printing and dyeing, coal, tanning, pharmaceutical, food, stone,and so on.

 

Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
Charge type
White granular
800-2000
0-50
30min-1h
>88
Anionic,Cationic
Emulsion
400-2000
0-50
20min
35-40
Anionic,Cationic

Ⅰ.DRINKING WATER GRADE PAM
Drinking water grade PAM is mainly be used in raw water treatment,sugar making,fermentation,etc..PAM can be added in raw water for the purpose of settling and flocculating,which can effectively reduce the dosage of additive such as poly-aluminum, thus avoid producing too much sludge. Recommended products: A556PWG, A656PWG.In sugar making industry,PAM is efficient in the flocculating and precipitating of bagasse from sugar solution.After the treatment, clear sugar solution is obtained.Recommended brand :A756PWG. Choose the mixure of PAC and PAM for the separation and purification of sugar cane molasses to the best effect.Recommended brands: A556PWG, A756PWG. In fermentation industry, PAM can be used in the recycling of solid content(%) from diluted thin stillage water separated from alcohol.Recommended brands: A556PWG, A756PWG; In the fermentation process of zhongshengmycin, it is advisable to use PAM as a flocculant that will remarkably improve the liquid-solid separation performance.Recommended brand:C8040PWG.
Product appearance
Molecular weight(106)
Hydrolysis(%)
Dissolution time
Solid content(%)
Charge type
White granular
800-2000
0-50%
< 1h
>88
Anionic

ⅡUsage and dosage:
a, The concentration of the solution of these products work best in 0.1-0.4%, and neutral non-salt water is preferred to prepare the solution;
b, When being dissolved, sprinkle anionic polyacrylamide product evenly into the water,control the stirring speed within 50 ~ 200rpm. Heat if necessary (< 60℃), which can accelerate the dissolution;
c, Adjust the PH value of the solution to be treated to have the best effect of anionic polyacrylamide product (experiments are needed to determine the best PH value and the dosage of these products);
d, If flocs occur when anionic polyacrylamide product mixed with solution to be treated, slow the stirring speed to promote the growth of flocculant and accelerate the settlement.

 
               
 
 
 
 
 
 
友情链接: